T&D World's The Briefing Room

Preformed Line Products Adds Solar Power Generation to Manufacturing Facility in Albemarle, N.C.

albemarle2012a300dpi-2.jpgAugust 23, 2012, Cleveland, Ohio -- Preformed Line Products Company (“PLP”) recently expanded its global renewable energy power generation by adding a PV solar array at its manufacturing facility located in Albemarle, North Carolina. The new 50 kW grid-tied photovoltaic system is divided into multiple arrays positioned on the roof, parking area and front lawn of the facility. The mounting hardware systems feature the POWER-FAB® CRS, Top-of-Pole and new MPM-G2 ground mount systems designed and manufactured by PLP's wholly owned subsidiary DPW Solar in Albuquerque, NM. The roof mount structure is completely ballasted, requiring no roof penetrations, and qualified in wind tunnel tests. The MPM-G2 and TPM ground mount structures pivot for seasonally adjusting the module tilt angle to maximize energy production year round.

The PV solar power generation system consists of 224 Schott modules and a PV Powered Inverter. PLP expects the system to generate over 66 MW-hrs per year of clean energy which will supply a portion of the electricity consumed by the manufacturing facility. The system is closely monitored, and PLP has a kiosk in the front lobby so that the energy production from this array may be viewed real-time. As an added benefit, the new solar system not only generates reliable clean renewable power, but also provides a shade canopy for employee cars. With the new system in Albemarle, PLP now has approximately 700 kW in PV solar capacity installed at multiple manufacturing facilities worldwide including a PV solar system at its headquarters located in Cleveland, Ohio.

About Preformed Line Products

Founded in 1947, Preformed Line Products is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications, broadband networks and solar companies. Headquartered in Cleveland, Ohio, the Company operates three domestic manufacturing centers, located in Rogers, Arkansas, Albuquerque, New Mexico and Albemarle, North Carolina. PLP serves worldwide markets through international operations in Australia, Brazil, Canada, China, England, Indonesia, Malaysia, Mexico, New Zealand, Poland, South Africa, Spain and Thailand.

CONTACT:

Jean Reilly

Phone: 440-473-9186

Fax: 440-442-8816

jreilly@preformed.com

Discuss this Blog Entry 0

Post new comment
or to use your TDWorld ID
What's T&D World's The Briefing Room?

At the Briefing Room you will be able to stay up-to-date on the latest technology announcements where we will provide daily postings from our industry

Blog Archive

Sponsored Introduction Continue on to (or wait seconds) ×