What is the relationship between Jarvis in Iron Man/the operator in The Matrix and the Energy Control Center Operator (ECCO)? Belive it or not, there are a lot of similarities.This blog explains what an ECCO does on a regular basis. You will be surprised how much stuff the operator has to do during normal and emergency conditions and how serious some of these responsibilities are. The previous blog showed how the ECCO is the guardian of the electric grid, now you will understand what the operator does in more details.
The previous blog (http://tdworld.com/blog/life-energy-control-center-operator-ecco) explained what an ECCO does briefly, what’s unique about ECCOs and the stresses and importance of their job. I was asked to write about what ECCO does during non-emergency conditions. Prior to reading the responsibilities below, think of the ECCO as Jarvis in the movie Iron Man, the main control power/panel behind the suit and all Iron Man’s power or the operator from the movie “The Matrix”.
Before we discus different job responsibilities, please note that different utilities have different job titles and functions; however, I will try to generalize and include the functions that I am aware of:
· Emergency response: this has been discussed prior; simply assume you live in a city that is supplied by a substation that is supplied by two transmission towers. Now let’s assume, the station operator calls the energy control center and informs him/her that the tower or transformer on circuit 1 is on fire and immediate action is warranted. The ECCO has to assess the situation in no time and perform the necessary steps to de-energize (make unavailable) that troubled circuit only, such that he/she does not interrupt the electricity supply to the entire city. Trust me, it is much more difficult and challenging than this and of course, the complexity is proportional to the complexity of the utility’s electric grid and current system conditions just prior to receiving that emergency call.
· Schedule work: that may be broken into several classifications (for generation, transmission, substation and distribution):
o Schedule work after an emergency event, i.e., we may have restored the circuit or customers if there was an outage, yet the circuit needs to be restored to its 100% condition.
o Global change: may be related to emergency work or not, where a certain equipment defect was discovered that poses threat to the company personnel, public or the continuity of service and as a result all locations where this defect exist must be worked on, i.e. similar in cars recall.
o Reliability: schedule jobs to maintain the utility’s reliability standards and specifications, i.e. removing certain type of cable or part of equipment for reliability purposes.
o Load relief: as load grows, economy flourishes, more demand is added to the electric grid, and as a result, larger transformers, bigger size cables, new equipment, etc. are needed to sustain the demand increase.
o New business work: as small as one customer or more who either upgrading their service to a larger service, adding new equipment or the customer is entirely new altogether. Work is needed to connect the utility supplies to the customer’s equipment.
o Renewable energy: distributed generation, solar, wind and other renewable sources get added to the grid, work is needed to facilitate the interconnection, or to add stand-by services, in case the customer’s distributed generation or other sources are either inadequate to supply the full load or may be unavailable for any reason, i.e. schedule maintenance.
o Reacting to a sudden loss of wind in areas where wind energy is a large percentage of the utility’s generation.
· Customer request: certain customers may call the energy control centers and request to take their equipment out of service, i.e. testing their back-up generation or other customer related work or other work in the transit authority.
· Daily system responsibilities:
o React to alarms, i.e. investigate the cause and validity of the alarms and provide corrective actions.
o Control the station and transmission system voltages and ensure the voltage is within the schedule and specification. Think of the voltage as pressure and the danger of extremely high and extremely low voltage on the equipment and your household equipment.
o Facilitates all scheduled preventive maintenance.
o React to other non-forecasted events, i.e. car colliding with an electric pole that either resulted in damage to the pole and equipment or the fire department/police department or the city requesting that we remove from service the cables.
o Coordinate with generator operators when the units are either coming online or offline or when there is a need to adjust their loads.
o Work with engineering when an existing equipment or cable is approaching its capability or exceeded its capability.
o Prepare contingency plans for schedule outage, basically evaluate all the “what if scenarios” and providing corrective action for each scenario.
o Review impact of proposed schedule outage.
o Work with vendors/R&D and other departments when engineering or outside vendors want to test certain equipment or configuration.
o Facilitate testing new equipment, i.e. test set, breakers, etc.
o Monitor the system during storms, especially during lightning.
o React to whatever Mother Nature brings on, i.e. heavy rain, floods, hurricanes, lightning, sandy, extreme heat waves, etc.
o Interact with system operators, such as the NYISO, PJM, etc...
o Constantly reviewing the impact of losing the next worst cable/ equipment/ciruit and in some cases reviewing the next two worse cases.
o Reduce voltage at troubled areas when needed to reduce system stress and reduce loads.
o React to environmental events such as oil leaks.
o React to contractor’s damage, i.e. contractors digging into a live electric underground cable.
o React to water main break, which results in damage to electric cables and transformers.
o Review proposed system configuration changes from reliability and operations perspective.
o React to loss of communication, i.e. loss of telemetry (unable to view status of equipment, alarms and loading remotely from the control center) or loss of protection (this will probably be discussed in future blogs).
o Reacting to customer outages in an expedite manner.
o Reacting to gas leaks.
o Reacting to shortage of gas, especially if it will impact the generation of electricity.
o Providing control center tours for curious people to see where the magic takes place
o Responding to political requests and providing information to upper management mainly pertaining to unscheduled forced outages.
o Ensures that the utility’s system aides by federal and state policies and does not violate any procedures, i.e. FERC/NERC/NPCC, etc.
As seen, the ECCO has a lot of responsibilities (I didn’t even mention most of the responsibilities), none of which is marginal. In summary, ECCO is responsible for making sure electricity continues to be generated, transmitted and distributed in a safe and reliable manner; facilitates all system work to ensure the electric grid can withstand load growth and meet projected summer and winter peaks; provides means to adopt renewable energy sources, electric vehicles, etc. and other new initiatives. As the electric system becomes more complex, the ECCOs’ job becomes more challenging and complex. Not to mention all the work above occurs seamless to the customers. It is interting to visit a control center if you have the privileage and see how many monitors are in front of each operator.