3M Introduces First High-Voltage Cold Shrink Termination for Reduced Wall Cable
3M expands its line of cold shrink products for high-voltage applications with the first termination kits for 69/72.5 kV reduced-wall cable. The first high-voltage cold shrink product, a termination kit for 69kV standard-wall cable, was introduced in 2005.
The cold shrink silicone rubber termination kits QT-III, 7672-S-8 (RW) for 69/72.5 kV are designed for indoor or outdoor use and to be highly reliable – they meet or exceed the requirements of IEC 60840 for 72.5 kV, and solid dielectric insulation, such as PE, XLPE and EPR shielded high-voltage cables.
The new 3M termination is easier to install than other termination technologies, requiring no tools or heat source. Its light weight means that a crane is not required to install the termination. The simpler installation process can make possible a lower total installed cost and help reduce craft errors that may threaten reliability.
This new termination kit is designed to accommodate a wide range of cables and solid dielectric insulations in thicknesses of 400-mil to 470-mil (10.2 to 11.9 mm). It is rated for 325 kV BIL performance levels and covers a conductor size range of 250-2000 kcmil (120-1000 square millimeters). www.3M.com/highvoltage
Want to use this article? Click here for options!
© 2008 Penton Media Inc.
