Resources

Search, compare, and request quotes for nearly 13,000 products with detailed listings:

Blogs

  • 2012 IEEE PES Show Blog

    The IEEE Blog is a unique tour of the 2012 PES Expo in Orlando, FL, by Gene Wolf, former chairman of the IEEE PES T&D Committee.

White Papers

» More White Papers

Follow Power Editor Nikki Chandler on

Follow Technology Editor on Vito Longo

Find T&D World on Facebook

News Releases

Briefing Room

At the Briefing Room you will be able to stay up-to-date on the latest technology announcements where we will provide daily postings from our industry sources.

  
   

Keeping O'Hare Cool with CAMV

When Chicago, Illinois' O'Hare International Airport needed an upgrade of the control systems for the facility's complex heating, ventilating and air conditioning (HVAC) equipment, planners faced a power distribution problem.

In response, Southwire created a special version of its Covered Aerial MV (CAMV) system. This provided a cost-controlling solution that allowed the HVAC systems to keep operating during the major changes to the underground HVAC power distribution system. Southwire's solution fulfilled the project engineers' need for an economical, temporary power feed that could maintain service to the HVAC equipment without expensive underground work.

What O'Hare needed was 5-kV power in a 390-ft (119-m) run. Southwire's solution was to hang UL-rated cables from standard CAMV spacer hardware. The UL-rated cable can enter buildings and go directly into cable trays without expensive termination structures. The CAMV spacer hardware allows multiple circuits on a single pole, delivering high power density in the overhead distribution line. This unique combination from Southwire delivered significant cost savings compared to underground alternatives.

The cable used to solve the problem was a UL-rated 750 kcmil aluminum-conductor non-shielded MV-90 cable. A series of 50-ft (15-m)-high poles carry two circuits. Each circuit uses two 750 kcmil conductors per phase. The CAMV architecture lets all 12 conductors hang from two crossarms on each pole. Each group of three conductors and their spacer hardware are supported on an Alumoweld-Aluminum messenger.

Southwire's broad line of available cable constructions, along with innovative ideas from the sales group and customer, let Southwire engineers pair exactly the right conductor for the application with the CAMV hardware that keeps the cable system compact.

“Cable availability and the ability to keep the circuits compact and out of the way of the construction project were the keys to the end-to-end solution,” said Joe McAuliffe, Southwire senior product engineer.

Visit www. southwire.com.

Want to use this article? Click here for options!
© 2012 Penton Media Inc.


Acceptable Use Policy

Comments are the sole responsibility of the person posting them. T&D World will not edit postings. If T&D World editors deem any comment inappropriate, we will preempt or remove the posting.

General Rules: T&D World will not allow comments that are found to be degrading based on gender, race, class, ethnicity, national origin, religion, sexual orientation or disability. Neither will epithets, abusive language or obscene comments be allowed.

blog comments powered by Disqus

T&D TV

Most Read


Find Other Popular Items

Features

Vegetation Management
Grid Optimization

Upcoming Webcasts

Transmission & Distribution World allows you to access live and on-demand webcasts. Webcasts are available during their scheduled date and time. If you are unable to attend at the scheduled time, these free events will be available On-Demand for viewing at your convenience.


On-Demand Webcasts

» View More Webcasts

Jobzone
  • Transmission & Distribution World May 2012 Issue
  • Transmission & Distribution World April2012 Issue
  • Transmission & Distribution World March 2012 Issue
  • Transmission & Distribution World February 2012 Issue
  • January 2012 Issue
  • December 2011 Issue
  • November 2011 Issue

Browse Back Issues