Felling Trailers, Inc. introduces its new Air Bi-fold Ramps (patent pending) at CONEXPO-CON/AGG (IFPE) March 10-14, 2020, at the Las Vegas Convention Center, in Las Vegas, Nevada.
The Air Bi-Fold Ramp system is featured on Felling's 25-ton FT-50-3 LP, a tri-axle low profile flatbed tag trailer. Felling Trailers, Inc. will be at Booth F-1741 in the Festival Grounds Lot. The Festival Grounds Lot showcases exhibitors in Earth Moving & Material Handling, Hauling, Lifting (Aerial & Cranes), and Underground Construction. Demonstrations of Felling's Air Bi-Fold Ramps will be taking place in the booth throughout the duration of the show.
CONEXPO-CON/AGG is the international gathering place every three years for the construction industries. The event features exhibits of the latest technologies, equipment, products, and services plus industry-targeted education. IFPE returns every three years to showcase the latest innovations and expertise in the fluid power, power transmission, and motion control industries. The event features exhibits of the latest technologies, equipment, products, and services plus industry-targeted education.
CONEXPO-CON/AGG international exhibition is known for being the host to companies debuting new products to their industry partners. Felling Trailers, Inc. will follow suit, introducing its new product. Few manufacturers in the marketplace offer an Air Bi-Fold Ramp system, let alone with the functionality that Felling's offers. A key feature of Felling's design is in the operation of the flip ramp. The flip ramp locks out fully when extending preventing scraping or marring of the ground, which is undesirable, especially if it's a new surface of any kind. Another key feature is Felling' controlled flow air ramp technology, which provides for soft ground contact of the ramp, keeping new surfaces free from being damaged.
The Air Bi-Fold Ramps are 45 in. wide by 11 ft (7.5 ft +3.5 ft) wood inlaid. For close to a decade, Felling Trailers has offered air ramps with available lengths of 6 ft to 8 ft. The 11 ft Air Bi-Fold ramps were designed to accommodate the load angle necessary when loading cumbersome low clearance equipment such as paving equipment and directional drills. The Air Bi-Fold ramps’ length provides the operator with a gentler, more gradual incline to provide ease in loading/unloading with its 9.5º load angle with the option of air ride suspension when the air is dropped. Felling Trailers’ Air-Ramp technology allows operators to use the tow vehicles’ onboard air system to power the ramps, eliminating the maintenance of an onboard electric/hydraulic system. Furthermore, the patent-pending technology allows for minimal ground contact when deploying/retracting the ramps to reduce damage to new pavement when loading/unloading.
Felling Model FT-50-3 LP with Air Bi-Fold Ramps
- 26-ft Main Deck Length Plus 6-ft Double Incline Beavertail, Apitong Decking
- 45-in. Wide x 11 ft (7.5 ft + 3.5 ft) Bi-Fold Air Operated, Apitong Inlaid Ramps
- Air Brakes, ABS 2S/1M, Meritor WABCO (parking brakes on all axles)
- 25K Ridewell Oil Bath Axles
- 55-in. Spread, Ridewell 240 Air Ride with Dump Valve Suspension
- Air Lift Axle on 1st Axle
- 235/75R 17.5 in. Tires on 8 Bolt Aluminum Alcoa Dura Brite Wheels
- 140,000 lb Twin 2-Speed Jack (39,000 lb. Lift Capacity).
For more information, visit www.felling.com.
