T&D World's The Briefing Room

BURNDY® Announces the Expanded Line of HYREDUCERâ„¢ Kits (YSR-TC)

burndy-ysr.jpgAugust 18, 2010 -- BURNDY®, a manufacturer and provider of connector solutions to the industrial, energy, construction, telecommunication, petrochemical, data center, and transportation industries, announces the expanded line of HYREDUCERâ„¢ (YSR-TC) In-line Splice Reducer Product Line. Originally designed for the telecommunication industry to provide better wire management solutions when reducing conductors with irreversible compression connectors, other industries have seen the benefits and to answer these needs, BURNDY has expanded the line. These connector kits provide an in-line reduction of two conductors while keeping space requirements to a minimum.

The HYREDUCERâ„¢ kits are pre-package with the YSR-TC connector, heavy duty clear Telcordia GR-347-CORE “Abrasion and Cut Test” approved heat shrink and an installation instruction sheet. All YSR-TC connectors have an inspection hole so one can visually check for a fully inserted conductor. All YSR-TC are UL Listed and CSA Certified when crimped with the approved tool and die combination, a part of the BURNDY Engineered System.

About BURNDY® Headquartered in Manchester, New Hampshire and with over 85 years of dedicated customer support in both service and product, our customers need look no further than BURNDY® for all their connector, tool, and accessory needs. BURNDY® is the only manufacturer to have the BURNDY® Engineered System of coordinating dies, connectors and tools. The three elements have been specifically designed to work together and engineered to meet stringent, accepted quality standards – allowing the user complete confidence in the integrity of the connection.


For additional information, contact us at 47 E. Industrial Park Drive, Manchester, New Hampshire, 03109, call Customer Service at 1-800-346-4175, or visit our Web site at www.BURNDY.com.

Discuss this Blog Entry 1

Bert Capalad (not verified)
on Apr 27, 2015

need a resolution of what type of connectors do i need, terminal lugs of CB is smaller than the cable installed, is it available with your product line.

Post new comment
or register to use your TDWorld ID
What's T&D World's The Briefing Room?

At the Briefing Room you will be able to stay up-to-date on the latest technology announcements where we will provide daily postings from our industry

Blog Archive

Sponsored Introduction Continue on to (or wait seconds) ×